DNF Controls ST420-VSS - Manual (Page 17)

ST420-VSS User Manual Page 13 of 21
5. Follow the displayed prompt on the Shotbox and enter a Register
(Command Key) number.
Enter a 1, 2, or 3 digit number. Leading zeroes are not required.
Press the DELETE key to delete the last entered digit.
Press the ENTER key to complete the entry OR press the BACK or
ESC key to exit.
6. Follow the displayed prompt on the Shotbox and enter a Cue number.
Enter a 1, 2, or 3 digit number. Leading zeroes are not required.
Press the DELETE key to delete the last entered digit.
Press the ENTER key to complete the entry OR press the BACK or
ESC key to exit.
7. Follow the displayed prompt on the Shotbox and enter a label of 1 to
12 characters.
Press the DELETE key to delete the last entered digit.
Press the ENTER key to complete the entry OR press the BACK or
ESC key to exit.
The Label, Page and Command Key number will be displayed on the face
of the Shotkey. Or Script and Label will be displayed depending on menu
setting.
LEARN = SCRIPT
Overwrite an existing assignment or create a new assignment.
When the setting is set to "LEARN: SCRIPT", the user is prompted to enter
SCRIPT, CUE and LABEL.
1. Follow the displayed prompt on the Shotbox
2. Enter a 1 - 5 digit SCRIPT number. Leading zeroes are not required.
Press the DELETE key to delete the last entered digit.
Press the ENTER key to complete the entry OR press the ESC key to
exit.