DNF Controls ST420-VSS - Manual (Page 16)

Page 12 of 21 ST420-VSS User Manual
6. OPERATION
The Shotbox supports two major modes of operation— LEARN and RECALL.
After recalling a single or group of Command Keys, step forward or backwards
through each cue, or jump to a specific cue.
The Command Keys on pages 1 through 9 of Vista Advanced may be
downloaded into banks 1 through 9, respectively, on the Shotbox. The
Command Keys number 1 through 27 on each page will be downloaded into
Shotbox keys 1 through 27. See the “READ COMMAND KEYS” section in this
manual for more information. All operator LEARNs in these banks will be
overwritten.
Bank 0 on the Shotbox is reserved for Operator LEARNs. Any Command Key
on any page may be assigned to any Shotbox key. See the “LEARN
COMMAND KEY” section of this manual. Bank 0 assignments will not be
overwritten during a READ COMMAND KEYS download.
Bank 1 through Bank 9 will only allow the same Command Key number to be
assigned to a Shotbox key. For example, Command Key number 15 will be
assigned only to Shotbox key 15. The assigned cue number and text label
may be any value.
a) LEARN COMMAND KEY / SCRIPT
1. Press the LEARN key to initiate the Learn process.
The LEARN key led will turn on and the keyboard will turn yellow.
Press the LEARN key a second time to terminate LEARN at any time
prior to completing the Learn process. The LEARN key led will turn off.
2. Select a Shotbox BANK key. The BANK key led will turn on.
The Shotkeys will display all current LEARNs in the selected bank.
3. Select a Shotkey.
LEARN = CMD KEY
Overwrite an existing assignment or create a new assignment.
When the setting is set to "LEARN: CMD KEY", the user is prompted to enter
PAGE, REGISTER, CUE and LABEL.
4. Follow the displayed prompt on the Shotbox and enter a Page number,
1 – 20.
Enter a 1 or 2 digit number. Leading zeroes are not required.
Press the DELETE key to delete the last entered digit.
Press the ENTER key to complete the entry OR press the ESC key to
exit.