DNF Controls ST420-VSS - Manual (Page 14)

Page 10 of 21 ST420-VSS User Manual
i) Learn option
NOTE: The switches that are read from the Spyder using the "Read CMD
Keys" button are always read as Command Keys regardless of this menu
setting. This menu setting applies only to manual learns.
Press to toggle between "LEARN: SCRIPT" or "LEARN: CMD KEY"
When set to "LEARN: SCRIPT", all the switches that are learned contain
SCRIPT information. The actual Page and Register number is not saved.
The command key can be moved to any page or moved within the page
but the content of the switch stays the same.
The first line of the switches shows an up to 5-digit script number when
"LEARN: SCRIPT" is selected.
When set to "LEARN: CMD KEY", all the switches that are learned
contain Page and Register number information. If the command is moved
to another page or within the page the content of the switch has to be re-
learned.
The first line of the switches shows a page number and a register number
separated by a space when "LEARN: CMD KEY" is selected.