DNF Controls ST420-VSS User Manual
Page 20
Page 16 of 21
ST420-VSS User Manual
g) JUMP TO CUE
LEARN = CMD KEY
1. Press the JUMP key to initiate the jump process.
2. Follow the displayed prompt on the Shotbox and enter the desired
cue.
Enter a 1, 2, or 3 digit number. Leading zeroes are not required.
Press the DELETE key to delete the last entered digit.
3. Press ENTER to jump to the entered cue.
OR
3. Press the JUMP TO REG key.
4. Follow the displayed prompt on the Shotbox and enter the desired
page number.
Enter a 1 or 2 digit number. Leading zeroes are not required.
Press the DELETE key to delete the last entered digit.
Press the ENTER key to complete the entry OR press the ESC key to
exit.
5. Follow the displayed prompt on the Shotbox and enter the desired
REGISTER number.
Enter a 1, 2 or 3 digit number. Leading zeroes are not required.
Press the DELETE key to delete the last entered digit.
Press the ENTER key to complete the entry OR press the ESC key to
exit.
6. Follow the displayed prompt on the Shotbox and enter the desired
Cue number.
Enter a 1, 2 or 3 digit number. Leading zeroes are not required.
Press the DELETE key to delete the last entered digit.
Press the ENTER key to jump to the entered value OR press the ESC
key to exit.
LEARN = SCRIPT
1. Press the JUMP key to initiate the jump process.
2. Follow the displayed prompt on the Shotbox and enter the desired
cue.
Enter a 1, 2, or 3 digit number. Leading zeroes are not required.
Press the DELETE key to delete the last entered digit.
3. Press ENTER to jump to the entered cue.
OR
3. Press the JUMP TO SCRIPT key.