DNF Controls ST300-EVS - Manual (Page 9)

ST300-EVS & ST300-EVS-T, Slow Motion Controller 9 9 o o f f 2 2 4 4
c. CUE POINTS
1) Select a Cue Point
Press [NEXT CUE] or [LAST CUE] to step through the Cue Points.
OR
Manually enter the desired Cue Point number using the numeric keypad.
The current Cue Point number and its contents will be shown on the second line
of the display.
2) Mark/Enter/Edit a Cue Point
Press [MARK] to mark the VTR’s time into the Cue Point.
OR
Press [ENTER TIME] to use the numeric keypad. The ENTER TIME
indicator will turn on.
Manually enter a time on the numeric keypad. Press [ENTER] to save the
entered time.
OR
Press
[ESC] to exit without saving. The ENTER TIME indicator will turn off.
3) Goto/Preroll to a Cue Point
a) Select the desired Cue Point. The Cue number and its contents are
shown on the bottom line of the display.
b) Press [GOTO] to search to the Cue Point; the GOTO indicator will
turn on. When the VTR reaches the Cue Point time, the GOTO
indicator will turn off.
OR
Press [PREROLL] to preroll to the Cue Point. The PREROLL
indicator will turn on.
When the VTR reaches the Cue Point time, the PREROLL indicator
will turn off.
d. GOTO/PREROLL TO A MANUALLY ENTERED TIME
1) Press
[ENTER TIME] to use the numeric keypad.
Manually enter a time on the numeric keypad.
2) Press [GOTO] or [PREROLL] to search to the entered time.
OR
Press [ESC] to exit without searching.
The ENTER TIME indicator will turn off.