DNF Controls ST300-EVS - Manual (Page 8)

ST300-EVS & ST300-EVS-T, Slow Motion Controller 8 8 o o f f 2 2 4 4
4. OPERATION
a. LCD DISPLAY
During normal operation, the top row of the display shows the selected time mode
and current time location of the selected VTR.
For example: TM 01:12:09:23
Time Modes: TM= Tape Timer TC= LTC VT= VITC
The currently selected SLO-MO speed is displayed on the far right side of the
top row.
The bottom row of the display shows the current Cue Point number
and its contents.
b. TRANSPORT CONTROL
Select the desired transport function by pressing the appropriate switch on the SLOW
MOTION CONTROLLER.
The Real-Time Status Indicators will light to indicate the VTR's current tape transport
mode.
For
example: Pressing [PLAY] will put the VTR into the PLAY mode.
The PLAY Status Indicator will turn on when the VTR is in PLAY
mode.
Press [RECORD].
OR
Press [RECORD] + [PLAY] to put the VTR into Record mode (see
SETUP MENU).
NOTE: The VTR will not go into Record mode if “Record Inhibit” is enabled
on the VTR or tape cassette.
Check SETUP MENU prior to using the SLOW MOTION
CONTROLLER to confirm proper Record mode and other User
settable modes.