DNF Controls ST300-EVS - Manual (Page 20)

ST300-EVS & ST300-EVS-T, Slow Motion Controller 2 2 0 0 o o f f 2 2 4 4
RECORD [REC] or
[REC] + [PLAY]
(EVS MODE = OFF)
Places VTR in the Record mode selected by RECORD
MODE in the SETUP MENU.
REVERSE
PLAY
[REV] For T-BAR ONLY – HOLD key to play video in reverse.
RELEASE key to play forward.
REWIND [RWD] Press and HOLD to rewind. Release key to stop. Set WIND
Speed in MENU.
SHUTTLE [SHUTTLE] Select SHUTTLE mode and enable the Wheel.
SLOMO [SLOMO] Press SLOMO to slo-mo the VTR. Turn the Wheel or move
the T-Bar to change the play speed.
Press SLOMO to STILL frame OR press any transport key to
exit.
SLO-MO
SPEED PRESET
[SHIFT] + [SLOMO] For WHEEL ONLY - to preset the slo-mo speed. Turn the
Wheel to select desired speed.
Press [ESC] OR any transport key to exit.
STOP [STOP] Press once to STILL frame VTR.
Press again to put VTR into STOP mode.
TIME MODE
SELECT
[TIME MODE] Press to toggle between Timecode (TC), VITC (VT) or Tape
Timer (TM) display modes.
TIME PRESET
(Generator
Preset)
[SHIFT] +
[TIME MODE] Press to enter Time Preset.
Press [ENTER] to load Time Generator with 00:00:00:00.
OR enter the time desired via the numeric keypad and press
[ENTER] to load that time.
OR press [ESC] to exit without saving.