Function table – DNF Controls ST300-EVS User Manual
Page 18
ST300-EVS & ST300-EVS-T, Slow Motion Controller
1
1
8
8
o
o
f
f
2
2
4
4
8. FUNCTION
TABLE
Function Key
Press
Description
EJECT TAPE
[SHIFT] + [REWIND]
Eject tape from VTR.
ENTER TIME
[ENTER TIME]
To manually enter timecode number into the currently
displayed Cue Point, enter the desired timecode number using
the numeric keypad. Press [ENTER] to save your entry OR
[ESC] to exit without saving.
To enter a GOTO location without altering the contents of the
Cue Point, enter the desired timecode number using the
numeric keypad. Press [GOTO] to search to the entered time.
Press [ESC] to exit without searching.
EVS CREATE
CLIP
Press OUT to mark an OUT point and create a clip using the
currently selected cue point as the IN point. (The 2
nd
line of
the display shows the currently selected cue point.)
Alternatively, press OUT to mark an OUT point and then
MARK to select an IN point to create a clip using the selected
IN and OUT points. (While OUT point is active, the 2
nd
line
of the display shows the OUT point and the OUT LED is
illuminated.)
DISPLAY
OUT POINT
[SHIFT] + [OUT]
Press [SHIFT] + [OUT] to display the OUT point on the
second line of the display.
DELETE
OUT POINT
[DEL] + [OUT] Press
[DEL] + [OUT] to delete the OUT point.
EVS GOTO EE
[REC]
Press [REC] to view live video, record train.
EVS LOAD
CLIP
[SHIFT] + [GOTO]
Press [SHIFT] + [GOTO] to load the clip number that
matches the cue point number shown on the 2
nd
line of the
ST300’s display.
EVS SELECT
CLIP PAGE
[EE/PAGE]
Press to select EVS Page (0-9).
EVS START
RECORD
[SHIFT] + [RECORD]
Press [SHIFT] + [RECORD] to start recording on selected
record channel.
EVS STOP
RECORD
[SHIFT] + [STOP]
Press [SHIFT] + [STOP] to stop recording on the selected
record channel.
FFWD
[FFWD]
Press and HOLD to FFWD. Release key to stop. Set WIND
Speed in MENU.
FREEZE
ENABLE
[FREEZE]
Toggles the Freeze on/off. When the light is ON, the Freeze
is enabled. When the light is OFF, the freeze is disabled.
NOTE: This is NOT a REC OUT freeze, it IS a user defined
Freeze.