Evs functions, A. select evs mode, B. start record – DNF Controls ST300-EVS User Manual
Page 11: C. stop record, D. go to ee (load train clip), Select, Mode, Start, Record, Stop
ST300-EVS & ST300-EVS-T, Slow Motion Controller
1
1
1
1
o
o
f
f
2
2
4
4
5.
EVS FUNCTIONS
a. SELECT
EVS
MODE
1) Press
[MENU] key.
2)
Turn the wheel until the display says “EVS MODE:”
3) Press
{ON} softkey to turn EVS mode ON. When EVS mode is ON, special
EVS functions are enabled. When EVS mode is OFF the controller behaves as a
standard ST300 VTR controller.
4) Press [ESC] key to exit menu.
b.
START RECORD
1) Press
[SHIFT] + [REC] on VTR1 to start recording on Record channel 1 of the
EVS.
2)
The Record LED turns ON.
3) Press [SHIFT] + [REC] on VTR2 to start recording on Record channel 2 of the
EVS.
4)
The Record LED turns ON.
c.
STOP RECORD
1) Press
[SHIFT] + [STOP] on VTR1 to stop recording on Record channel 1 of
the EVS.
2)
The Record LED turns OFF.
3) Press
[SHIFT] + [STOP] on VTR2 to stop recording on Record channel 2 of
the EVS.
4)
The Record LED turns OFF.
d.
GO TO EE (LOAD TRAIN CLIP)
Press [REC] key to go to Live video on the corresponding Playback Channel.
e. SELECT
CLIP
PAGE
Press [EE/PAGE], then select page by pressing Keypad key [0] - [9].