DNF Controls 2044CL-L-PBIO - Manual (Page 5)

2044CL-L-PBIO, 300 Clip Fast Access System, Louth Protocol Page 5 of 27
Getting Started . . .
2. SYSTEM DESCRIPTION
The 2044CL system includes DNF’s most robust controller, the ST400, with the industry’s
premiere Shotbox, the ST420.
The ST400 controls up to 6 video channels individually or ganged. It features full transport
functionality.
The LCD buttons on the Shotbox display clip names and delivery instant access to video clips on
up to 6 channels.
The assign-able keys on the ST420 Shotbox allow clip names to be organized on ten different
banks of keys for easy access.
The 2044CL provides instant access to fill clip and key clip combinations with the press of one
key.
The 2044CL-L supports VDCP protocol and requires that the Video Server be controllable under
VDCP Protocol.
The 2044CL provides instant access to existing video clips stored in the Grass Valley Group
PROFILE, the Leitch VR, and other Video Servers supporting VDCP Protocol.
DEFINITIONS
‰ Throughout this document, DDR, VDR & Video Server will be referred to collectively as
“Video Server.”
‰ The ST400-S/SM will be referred to as ST400.
‰ The ST420 SHOTBOX will be referred to as “Shotbox.”
SHOTKEY refers to the 1-30 switches on the Shotbox.
‰ Words surrounded by brackets, for example, [ENTER], are keys on the ST400 or the
SHOTBOX. [XXX] + [XXX] means hold the two keys down simultaneously.
‰ The 6 keys directly below the display are referred to as “Softkey.” For example {GANG}.
Their function changes as indicated on the last line of the display.
‰ Shotkeys and Cue Points refer to the same memory locations. Both terms are interchangeable.