DNF Controls 2044CL-L-PBIO User Manual
Page 21
2044CL-L-PBIO, 300 Clip Fast Access System, Louth Protocol
Page 21 of 27
STOP
[STOP]
Press once to STILL frame VTR.
Press again to put VTR into STOP mode.
TIME MODE
SELECT
[TIME MODE]
Press to toggle between Timecode (TC), VITC (VT) or Tape
Timer (TM) display modes on a VTR and between Remaining
Time (RT) and Elapsed Time (ET) on a Video Server.
PLAY
[PLAY]
If an OUT point is marked, play to the OUT point and stop. If no
OUT point is marked, play normally.
If the clip ID ends with an “*”, the clip will loop continously.
RECUE
[RECUE]
If the IN point is marked, cue to the IN point
REALIGN
GANGED
CHANNELS
[SHIFT] + [STOP]
Search ganged channels to the appropriate time to resynchronize
them.
STEP 1
FRAME
FORWARD
[SHIFT] + [FFWD]
Moves the video forward by 1 frame.
STEP 1
FRAME
BACK
[SHIFT] + [REWIND]
Moves the video back by 1 frame.
PBIO ENABLE/
DISABLE
[PBIO]
PBIO Led is ON if PBIO is enabled. Press key to toggle PBIO
Enable/Disable. The led blinks when a valid PBIO command is
received from the production switcher.