DNF Controls 2044CL-L-PBIO - Manual (Page 15)

2044CL-L-PBIO, 300 Clip Fast Access System, Louth Protocol Page 15 of 27
17. VIEW SHOTKEY ASSIGNMENTS
ON THE SHOTBOX
a. Press [VIEW]. The VIEW LED indicator will turn on.
b. Select the desired BANK by pressing the appropriate bank key.
c. Press and hold the desired Shotkey.
d. The LCD display on the Shotkeys will show the current assignment of all 6 VTRs for the
pressed Shotkey.
e. Release the Shotkey when done viewing.
f. Repeat steps a through e.
18. REALIGN GANGED CHANNELS
When the channels are Jogged/Shuttled/Slomoed in gang, they may drift apart. To bring the
channels back to their initial offsets, press [SHIFT] + [STOP].
19. CREATE CUE POINT LABELS
Use LABELS mode to assign meaningful names to cue points. Rather than viewing cryptic CLIP
IDs on the Shotkeys, LABELS provides a faster and easier method to select cue points.
If different parts of the same clip are assigned to many Shotkeys, LABELS allows a unique name
to be assigned to each Shotkey.
ON THE ST400
a. In Setup Menu, turn LABEL MODE on.
b.
Select cue point to label.
c. Press the [LABEL] key.
d. Manually enter a label, up to 8 characters in length, using the numeric keypad, ST420
Shotbox QWERTY keyboard, or PC keyboard.
e. Press the [LOAD] shotkey on the Shotbox to assign the entered label to the selected cue
point.
OR
[ENTER] on the ST400.
OR
[ENTER] on the PC keyboard.
OR
[NEXT CUE] or [LAST CUE].
NOTE: Labels are saved in non-volatile memory in the ST400, not in the Shotbox. They are not
saved in the video server.