Function table – DNF Controls 2044CL-L-PBIO User Manual
Page 20
2044CL-L-PBIO, 300 Clip Fast Access System, Louth Protocol
Page 20 of 27
21. FUNCTION TABLE
Function Key
Press
Description
CUE TO OUT
POINT
{CUE OUT}
If OUT point is marked, cue to the OUT point.
FFWD
[FFWD]
Press and hold to FFWD. Release key to stop. Set WIND
SPEED in MENU.
GO TO
ENTERED TIME
[SHIFT] + [RECUE]
To search, manually enter the desired time on the ST400’s
numeric keypad.
Press [ENTER] or [RECUE].
GANG SETUP
{GANG}
Individually press the VTR keys to be included in the gang. The
LED above the key will turn on. Press the VTR key again to
remove from gang; the LED above the key will turn off. Press
[ESC] to exit.
Upon exiting, all members of the gang will have their VTR LEDs
turned on. The flashing LED shows which VTR is currently
selected.
JOG
[JOG]
Select JOG mode and enable Wheel.
LABEL
[LABEL] Press
[LABEL].
Enter a label (name) for the selected Cue Point.
Use the Shotbox or PC keyboard.
Press [ENTER] on PC keyboard or ST400.
Press [LOAD] on Shot Box.
LAST CUE
[LAST]
Step to the previous Cue Point Location.
NEXT CUE
[NEXT]
Step to the next Cue Point Location.
RECORD
[REC]
Places VTR into the Record mode selected by RECORD MODE
in the SETUP MENU. Press [RECORD] or [RECORD] +
[PLAY].
REWIND
[RWD]
Press and HOLD to rewind. Release key to stop. Set WIND
SPEED in MENU.
SHUTTLE
[SHUTTLE]
Select SHUTTLE mode and enable Wheel.
SLOMO
[SLOMO]
Press [SLOMO] to slo-mo the VTR. Turn the Wheel
(or move the T-bar, if available) to change the play speed.
Press [SLOMO] to STILL frame
OR press any transport key to exit SLOMO.