DNF Controls 2034CL-SX-PBIO - Manual (Page 14)

14 2034CL-SX-PBIO, 300 Clip Instant Access System, Sony SX Protocol
E XECUTE C APTURE F UNCTION
1. Press
[SHIFT] + [RECORD].
The display will prompt you for a CLIP ID.
2. Enter the new CLIP ID using the numeric keypad on the ST300
OR the “qwerty” keyboard on the SHOTBOX.
3. Press [LOAD] OR [ENTER] to start capturing.
The ST300 will create the new CLIP ID on the Video Server.
The Source VTR will preroll to the IN Point, then play.
At the Source VTR’s IN point, the RECORDER will go into record.
At the Source VTR’s OUT point, the RECORDER will terminate record,
post-roll for 2 seconds, then stop.
The Source VTR will search to the OUT point and stop; The OUT point will be cleared.
The IN indicator will stay on. The OUT indicator will turn off.
13. VIEW CONTENTS OF CUE POINTS
1. Press
[VIEW]. The VIEW indicator comes on.
2. Press the switch for which you would like to see the content.
3. The switch turns RED and the content (CLIP ID) of the corresponding Cue Point
is displayed on a virtual display.
For Example:
NOTE: All the remaining switches are not illuminated.
4. Release the keys to return to normal operation.
14. SHOTBOX SHOTKEY MAPS
The SWITCHES on the SHOTBOX access the SHOTLIST locations as follows:
BANK 0, SWITCHES 1 Î 30 access SHOTLIST locations 001 Î 030.
BANK 1, SWITCHES 1 Î 30 access SHOTLIST locations 101 Î 130.
BANK 2, SWITCHES 1 Î 30 access SHOTLIST locations 201 Î 230.
BANK 3, SWITCHES 1 Î 30 access SHOTLIST locations 301 Î 330.
BANK 4, SWITCHES 1 Î 50 access SHOTLIST locations 401 Î 430.
BANK 5, SWITCHES 1 Î 30 access SHOTLIST locations 501 Î 530.
BANK 6, SWITCHES 1 Î 30 access SHOTLIST locations 601 Î 630.
BANK 7, SWITCHES 1 Î 30 access SHOTLIST locations 701 Î 730.
BANK 8, SWITCHES 1 Î 30 access SHOTLIST locations 801 Î 830.
BANK 9, SWITCHES 1 Î 30 access SHOTLIST locations 901 Î 930.
VTR 1
Clip 23 VTR 2
Clip 13 VTR 3
Clip 77 VTR 4
No Assignment