DNF Controls 2034CL-SX-PBIO - Manual (Page 13)

13 2034CL-SX-PBIO, 300 Clip Instant Access System, Sony SX Protocol
Advanced Features . . .
12. CAPTURE
The CAPTURE function allows source material from the tape drive of the Hybrid
Machine, to be easily and quickly recorded into the HDD. A CLIP ID is created and the
source material is transferred into the HDD.
Use the transport function keys to control the source Drive.
S ETTING THE IN (OUT) P OINT
1.
Locate the clip to the desired IN (OUT) time
2. Press [IN] ([OUT]).
The IN (OUT) indicator comes on
OR
Press [SHIFT] + [IN] ([OUT]) to manually enter a new IN (OUT) time.
V
IEW THE
IN (OUT) P
OINT
1.
When the IN (OUT) indicator is on,
Press [IN] ([OUT]) to view the existing IN (OUT) Point.
2. While viewing the IN (OUT) Point:
Press [MARK] to overwrite the saved time with the current time.
Press [RECUE] to search to the IN (OUT) point.
C LEARING AN IN (OUT) P OINT
Press and hold [DEL] then press and release [IN] ([OUT]).
The IN (OUT) indicator goes out.
E NTER P REROLL V ALUE
1. Press
[MENU]. The MENU indicator will turn on.
2. Turn the Wheel until “Enter PREROLL:” is shown on the display.
3. Enter the desired preroll value using the ST300’s numeric keypad.
4. Press [ENTER] to save the entered value OR [ESC] to exit without saving.
S ET THE R ECORD D ELAY (See MENU for details).