DNF Controls 2034CL-TO-PBIO - Manual (Page 9)

9 2034CL-TO, 300 Clip Instant Access System Pinnacle Thunder Protocol,
PBIO Option
4. VIDEO SERVER SETUP
a.
Select ODETICS Broadcast communications protocol on the VIDEO SERVER to be
controlled.
b.
Assign a serial port on the VIDEO SERVER through which the ST300 will control it.
NOTES:
The VIDEO SERVER may not support LTC or VITC time modes in ODETICS Broadcast mode.
The ST300 will default to Tape Time if a non-supported time mode is selected.
In Odetics Broadcast mode, the VIDEO SERVER may O
NLY allow Full Record.
INSERT and ASSEMBLE record modes may be disabled.
5. CLIP LIST FUNCTION
a. Press
[CLIP LIST] to view the list of CLIP IDs that are on the Video Server. The
display shows “CREATE NEW CLIP.” The CLIP LIST indicator turns on.
b. Press
[LOAD] to create a new clip.
OR
Turn the Wheel to view CLIP IDs.
Turn the Wheel clockwise to scroll forward, or counter-clockwise to scroll backward,
through the list of available CLIP IDs in the Video Server.
c. Press
[LOAD] to immediately load the current CLIP ID (shown on the top line of
the display). After loading the selected clip, the CLIP LIST function will terminate. The
CLIP LIST indicator will turn off.
d.
CLIP IDs (up to 8 characters) can be manually entered from the ST300 numeric keypad
OR the SHOTBOX “qwerty” keyboard.
e. Press
[LOAD] to load the entered CLIP ID and NOT save it in the SHOTLIST.