Diamondback 1190 Er - Manual (Page 13)

14 1190 Series Owner’s Manual
1190St Assembly Instructions
side, to secure these handrails.
3. Assemble upper portion of the upper handrails onto the supports on the
handle bars. Place the other half of support plate on top of the handrail.
Insert and finger tighten two M8x55mm bolts on each side. – See figure
on page 13.
4. Tighten all 20 bolts of handrail assembly with an Allen wrench.
Step 6: Water Bottle
1. Place the bottle holder on the console mast. Insert and tighten the two
M5x12mm screws using a Phillips screwdriver.
2. Snap the water bottle into the holder
Step 7: Leveling Pad
1. Adjust both leveling pads, located on the bottom of stabilizer bar, to ensure
your equipment is leveled with floor.
1190seriesOM 5/21/08 2:31 PM Page 14