Daktronics GPR-12EV-RGB - Manual (Page 23)

Signal Installation 17
Section 4: Signal Installation Overview
Daktronics GalaxyPro ® Revolution displays are equipped to receive various forms of Ethernet
communication. GalaxyPro ® Revolution displays require the use of ports 4500-4525 for
communication and port forwarding applications. For communication signal installation details,
consult the quick guide and manual included with the communication equipment. Each
communication type and its manual number are listed below.
Communication Type Communication Manual Communication Quick Guide
Ethernet DD1417609 DD1417573
Fiber Ethernet DD1417611 DD1417581
Wireless Ethernet Bridge DD1685027 DD1417586
These are the standard communication types, but each site is unique and may include additional
equipment. If problems arise, contact the display’s seller, service company, or Daktronics Customer
Service.
4.1 Primary/Mirror Signal Connection
If this display is a two-sided primary/mirror display, a quick-connect fiber-optic cable is
provided to connect signal between the two faces. Connect J34-Signal Out on the Primary
display to J32-Signal In on the Mirror display. Secure the excess cable to the supports to
prevent damage from weather or vandalism. Figure 18 and Figure 19 show the cable and the
quick-connect jacks.
Figure 18: Quick Connect Signal Cable
Figure 19: Fiber Interconnect Jack