4 sectional mounting xe "sectional mounting, Bottom/bottom-left section, Top/top-left section xe "additional section:height – Daktronics GPR-12EV-RGB User Manual
Page 14: Sectional mounting, Top/top-left section

8
Mechanical Installation
2.4 Sectional Mounting
Bottom/Bottom-Left Section
Before mounting, connecting the sections, or installation:
1. Remove
modules from
the first (left)
column.
2. Remove the
modules located
in front of the
power
termination
panel (refer to
layout drawings
in Appendix A).
3. If an additional
section will be
added for
width, remove
modules from
the last (right)
column.
Top/Top-Left
Section
Before mounting,
connecting the sections,
or installation:
1. Remove
modules from
the first (left)
column.
2. Remove every
odd module
from the bottom
row.
3. If an additional
section will be
added for width,
remove modules
from the last
(right) column.
Figure 9: Bottom Section Preparation
Figure 10: Top Section Preparation