Daktronics DF-1060 - Manual (Page 43)

Lottery Display Operation 5-5
The following LCD prompt is shown for either Manual or Automatic dimming
selections:
LCD Screen Action
INTENSITY XX
↓↑
ENTER TO SET
XX – Current intensity (1-16)
Max Intensity - 16
Press the up or down arrow key < ↑↓ > to modify
the current intensity of the display
(Note: The DataMaster must be connected to
the display)
Press < ENTER > to accept this intensity. If the
manual dimming mode is selected, this will be
the new intensity for the display. If the
automatic dimming mode is selected, the
display will illuminate in full-bright mode, which
is the maximum intensity level.
A third option controlled by the < DIMMING > key is the Blank Sign command, which
clears the display completely.
LCD Screen Action
Dimming
Blank sign
↓
Blank the sign?
Yes
no
Restart sign?
Yes
Press < ENTER > to accept this option.
The next LCD dialog will ask whether you want
to blank the screen or escape. The LCD
toggles between Yes and No. Pressing < CLR >
resumes normal operation; pressing < ENT >
actually blanks the sign.
To resume normal operation from a blanked
sign, press the < DIMMING > key again. The DM-
100 will display a Restart Sign message.
There is only one option: Yes. Press < ENT > to
restart.
Display Sequence
Once connected to the base of the display or to the indoor j-box, press < DISPLAY
SEQUENCE > to display the new sequence on the display.