Daktronics DF-1060 - Manual (Page 36)

Replacement Parts List
The following is a list of possible replacement parts for the DataMaster 100
controller. When re-ordering a part, be sure to use its corresponding part number.
Description
Daktronics Part
No.
Wall pack transformer T-1118
DataMaster 100 controller 0A-1196-0088
Control Insert LL-2551
Cable, DB-9 male to DB-9 female, 10' W-1267
Refer to Section 3.9 for details concerning the Daktronics exchange and repair
programs.
4.2 Control System Overview
Reference Drawings:
Riser Diagram, Outdoor Wire Control ......................... Drawing A-164988
Riser Diagram, Indoor Wire Control ............................ Drawing A-175342
The DataMaster Lottery displays may be operated with standard DataMaster
software using a DM-100 controller. In many cases, however, the displays will be
operated with custom or third-party software
All of the displays in the LED DataMaster Series have several control options
including direct wire, modem, radio, and data download from a junction box at the
sign. Refer to the appropriate system riser diagram, listed above, for detailed
instructions on control system setup.
Wire Control
Reference Drawings:
Riser Diagram, Outdoor Wire Control ......................... Drawing A-164988
Riser Diagram, Indoor Wire Control ............................ Drawing A-175342
In almost all cases, the DataMaster Lottery displays will be controlled from a
location inside a building, either by direct wire or by modem, but they may also be
controlled from the base of the display. Drawings A-164988 and A-175342 and the
subsections that follow provide greater details on installations using signal wire.
4-2 Control System Overview