Daktronics DF-1060 - Manual (Page 42)

5-4 Lottery Display Operation
Dimming
The dimming level of the Lottery display can be adjusted in two ways. A
temperature/light sensor, mounted near the display, can detect the level of ambient
light at the display location and dim the sign’s LEDs accordingly. This function is
known as automatic dimming. When the manual dimming function is selected, the
LEDs remain at the same level of brightness regardless of the level of light detected
at the display.
To select either of these functions, press <
DIMMING >. The current setting is shown
on the bottom line of the LCD.
LCD Screen Action
DIMMING
AUTOMATIC
↓
Press the down arrow key < ↓ > to toggle
through dim settings:
Automatic – The display automatically dims
based on the light detected at the display
Manual – The display dimming level is set
manually. Once set, this value remains
regardless of the level of light detected at the
display.
If AUTOMATIC dimming is selected, the following LCD prompt will be shown:
LCD Screen Action
SET AUTO DIMMING
MAX INTENSITY? Press the < ENTER/EDIT > key to edit the auto
dimming max intensity. This is the maximum
intensity that the display will use in full-bright
modes (during daylight hours.)
Press < CLEAR > to keep the current auto
dimming maximum setting