Daktronics DF-1060 - Manual (Page 19)

4. Connect the incoming phone line to the modem on J5, or wire the line to
TB2, Tip and Ring inputs.
5. Turn the display power on, and test the installation.
Figure 5: Modem-to-Driver Connection
2.5 Radio Installation
The Data Master radio permits control of any DataMaster display without the use of
a direct-wired connection between the DataMaster 100 and the display. Because the
radio is optional with DataMaster displays, the receivers and transmitters must be
field-installed. Please refer to the DataMaster Radio Installation Manual,
ED-13894, for complete details on installation and setup for a bidirectional radio
system.
Mechanical and Electrical 2-7
Specifications