Daktronics DF-1060 - Manual (Page 27)

16-Column LED Driver
Connector No. Function
J1 – 16 Outputs to digits
J17 Power and signal input
J18 Relay
J19 Address
J20 Protocol
J21-22 ISP
J23 12 V DC out
J24 Modem
J28 Switch inputs
TB1 CAN (photo/temp sensor)
Output connectors 1 through 16 each have nine pins. Pin 7 provides power (hot) to
the digit or indicators wired to that connector. The other eight pins provide switching
connections.
The display line controlled by the driver is set with jumper wires in the 12-pin
address plug inserted in jack J19. All DataMaster displays ship with a “Line 1” plug
installed.
Display Maintenance 3-5
and Troubleshooting