Daktronics Rear-Ventilated GalaxyPro GP3 Series - Manual (Page 34)

29 Replacement Parts List
Section 12: Replacement Parts List
The following table contains some of the items that may need to be replaced over a period of time. All
GalaxyPro ® GP3 displays ship with at least two spare modules
with power supplies and two spare SATA cables depending on
the size of the display.
If a component is not listed in the replacement parts list, use the
label to order a replacement. Most components within displays
carry a label that lists the part number of the unit. A typical label
is shown in Figure 27, with the part number in bold.
Part Number Description
0A-1576-7001 26 mm Module With Power Supply Attached
0A-1586-7001 20 mm Module With Power Supply Attached
0A-1621-7001 16 mm Module With Power Supply Attached
0A-1327-0300 DMP-4060 Controller Enclosure Assembly
0A-1487-6009 PLR Assembly
W-2094 SATA Cable, 2 Foot
W-1659 Fiber Cable
B-1045 Fan Assembly
0A-1327-1094 Quick Connect, Primary Input
0A-1327-1095 Quick Connect, Primary Output
0A-1327-1096 Quick Connect, Mirror Input
W-1658 Fiber-Optic Cable, 10 Foot
W-1685 Fiber-Optic Cable, 33 Foot
W-2030 Fiber-Optic Cable, 25 Foot
0A-1327-3105 Thermostat Assembly
0A-1327-3016 Light Sensor Assembly
0P-1127-0024
SN: 2465
02/19/12 Rev. 1
Figure 27: Typical Parts Label