Contemporary Control Systems BAScontrol20 User Manual User Manual
Page 53
TD100700-0MB
53
Figure 40
— SAX File Statistics Screen
The default selection gives you the data from the saved zip file indicated. If using
this option, make sure the saved location is what you want
— otherwise browse from
the main page for the correct location. Click on Get Data to retrieve the data.
If instead you check the box that provides the SAX file from a controller in the field,
make sure the IP address indicated is the desired controller otherwise change the IP
address on the main page.
The final option is to uncheck both boxes and search for the SAX file location on
your computer. Usually, this is in this folder
C:\Niagara\Niagara-3.8.38\sedona\store\apps
Once you find the location click Get Data. The information will look like this:
Figure 41
— SAX File Statistics Screen
Notice that the SAX file does not contain the Device Name. This data is stored in the
bas_cfg.xml file which can be retrieved directly from the controller from the zip file.
However, all three methods will provide the wire sheet memory size, number of
components, number of links as well as the application name.