Contemporary Control Systems BAScontrol20 User Manual - Manual (Page 33)

TD100700-0MB
33
5.2.1 Universal Input
— Configured as Analog Input
(Channels UI1–UI8)
You can measure 0 –10 V with UI1–UI8 as follows:

Access the Main Page ( Figure 13 ) and click a title link from among UI1–UI8.

Under BAS Channel Configuration in the new page that appears, set the
Channel Type to Analog Input. An example appears in Figure 19 .

Under BACnet Object Configuration, the Units value defaults to VOLTS.

Attach your device to the pair of BASC20 pins for the chosen channel
— so
that the more positive connection is to pin A and the more negative to pin C.
Figure 19 — Universal Input Configured as Analog Input