Contemporary Control Systems BAScontrol20 User Manual - Manual (Page 28)

TD100700-0MB
28
5.1.5 System Status
This read-only screen is displayed in Figure 15 and reports the three items:

Firmware Revision Your firmware version is listed in the upper-left corner.

MAC ID The Ethernet MAC address in the middle.

Available Memory This value in the upper-right corner will vary often.

System Message Log is discussed in Section 5.1.5.1 .
Figure 15
— System Status Window
5.1.5.1 System Message Log
Various items are reported in Figure 15 after a power up cycle. Information is used by
technical support at Contemporary Controls.