Contemporary Control Systems BAScontrol20 User Manual - Manual (Page 26)

TD100700-0MB
26
5.1.4 System Configuration
Clicking the System Configuration button shown in the lower-left area of Figure 13
opens the window depicted in Figure 14
— where you can configure the settings
discussed in the next four sections.
Figure 14
— System Configuration Window
Four sections and two special buttons exist on the System Configuration screen:

IP Configuration is discussed in Section 5.1.4.1.

BACnet Device Configuration is discussed in Section 5.1.4.2.

Enable Protocol is discussed in Section 5.1.4.3.

Authentication is discussed in Section 5.1.4.4.

Kit Update is discussed in Section 5.1.4.5