Comtech EF Data DT-4500 Series - Manual (Page 3)

Filename: T_ERRATA
1
Errata A
Comtech EF Data Documentation Update
Subject: Added A.1.1 Configure Mute Mode
Date: December 16, 2005
Document: DT-4500 Series, Down Converters, Installation and Operation
Manual, Revision 1, dated June 15, 2005
Part Number: MN/DT4500.EA1
Collating Instructions: Attach this page to page A-1
Comments:
Add paragraph A.1.1 to read:
Change Specifics:
A.1.1 Configure Mute Mode
Turns the mute mode ON or OFF. When mute mode is OFF (default), the unit will mute
upon changing RF frequency. When mute mode is ON, the unit will remain whatever its
mute state upon changing RF frequency.
Command Details
Config. Mute Mode: xxx = ON or OFF
Confirmation: >DEV/CMM_xxx'cr''lf']
Mute Mode Status: _'cr'
Confirmation: >DEV/CMM_xxx'cr''lf']