Comtech EF Data DT-4500 Series - Manual (Page 47)

DT4500 Series Down Converters MN/DT4500.IOM
System Operation Revision 1
29
FREQ= 12XXX.XXX-MHz-----
ATTN=-10.00-DB---Rx=OFF-
ENTER
---------SELECT---------
----CONFIGURATION-MENU--
--ENTRY-MODE-=-REMOTE---
-COLD-START-=-DISABLED--
FAULT RECOVERY:-MANUAL--
------------------------
REDUNDANCY-CONFIG?-OFF--
------------------------
* Displayed only when there is
a 5/10 MHz reference input.
LEGEND
DISPLAY
KEY-PAD
ENT
CLR
---------SELECT---------
--MONITOR-STATUS-MENU---
--REFERENCE-PRESENT-----
----EXTERNAL-5-MHz------
Figure 13. Configuration Menu Commands - Redundancy OFF.