A. snmp interface – Comtech EF Data CiM-25/600 User Manual
Page 65

CiM-25/600 IP Enabled M&C
Rev. 3
SNMP Interface
CD/CIM25600.IOM
45
Appendix A.
CiM-25/600 SNMP Interface
A.1 SNMP
I
NTERFACE
The Simple Network Management Protocol (SNMP) is an application-layer protocol
designed to facilitate the exchange of management information between network devices.
The CiM-25/600 SNMP agent supports SNMP v2c.
A.2 MIB-II
The CiM-25/600 agent implements RFC 1213, Management Information Base for
Network Management of TCP/IP-based Internets. This is known as “MIB-II support.”
Please refer to RFC 1213 for this definition.
A.3 P
RIVATE
MIB I
MPLEMENTATIONS
The agent also implements two private MIBs for the CiM-25/600. The CiM IP Controller
MIB (CiM-25) holds all the security, feature selection, and IP related parameters, and the
CDM-600 modem MIB contains all the modem specific parameters.