Comtech EF Data CiM-25/600 - Manual (Page 126)

CiM-25/600 IP Enabled M&C Rev. 3
SNMP Interface CD/CIM25600.IOM
106
A.7.68
UNIT
A
LARM
M
ASK
Name unitAlarmMask
OID 1.3.6.1.4.1.6247.18.1.5.4
Full path iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247)
.cdm600(18).cdm600Objects(1).utilityParameters(5).unitAlarmMask(4)
Module CDM600
Parent utilityParameters
Prev sibling unitTestMode
Next sibling txBackwardAlarmEnable
Type OBJECT-TYPE
Numerical syntax SNMP_SYNTAX_INT
Base syntax INTEGER
Composed syntax INTEGER
Status current
Max-access read-write
Size list
1 0..111111
Description Unit Alarm Mask. (MSK?, MSK=) MSK=123456,
Bit 1 = Mask TX AIS Alarm. (0=Unmasked, 1=Masked)
Bit 2 = Mask RX AIS Alarm. (0=Unmasked, 1=Masked)
Bit 3 = Mask Bufferslip Alarm. (0=Unmasked, 1=Masked)
Bit 4 = spare, always 1.
Bit 5 = Mask RX AGC Alarm. (0=Unmasked, 1=Masked)
Bit 6 = Mask Eb/No Alarm. (0=Unmasked, 1=Masked)
A.7.69
TX
B
ACKWARD
A
LARM
E
NABLE
Name txBackwardAlarmEnable
OID 1.3.6.1.4.1.6247.18.1.5.5
Full path iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247)
.cdm600(18).cdm600Objects(1).utilityParameters(5).txBackwardAlarm
Enable(5)
Module CDM600
Parent utilityParameters
Prev sibling unitAlarmMask
Next sibling rxBackwardAlarmEnable
Type OBJECT-TYPE
Numerical syntax SNMP_SYNTAX_INT
Base syntax INTEGER
Composed syntax INTEGER
Status current
Max-access read-write
Size list
1 0..2222
Description Tx Backward Alarms Enable. (TBA?, TBA=)