Comtech EF Data CiM-25/600 - Manual (Page 58)

CiM-25/600 IP Enabled M&C Rev. 3
SNMP Interface CD/CIM25600.IOM
38
3.5.1.8 C
HANGE
R
EAD
O
NLY
P
ASSWORD
Using the !RP command, the Administrator can change the Read/Only login Password.
The command protocol is as follows:
Format: !RP
Where: can be any alphanumeric string of 4 to 10 characters in length
Query Format: !RP ?
Response: !RP
Note: Changes made via this command do not become active until the user has sent a !EE
command to commit the changes to EEPROM of the CiM-25.
3.5.1.9 E
NABLE OR
D
ISABLE
PING
Using the !PG command, the Administrator can either enable or disable PING. The
command protocol is as follows:
Format: !PG
Where: 0 = Disabled, 1 = Enabled
Query Format: !PG ?
Response: !PG
Note: Changes made via this command do not become active until the user has sent a !EE
command to commit the changes to EEPROM of the CiM-25.
3.5.1.10 C
OMMIT
C
HANGES TO
EEPROM
Using the !EE command, the Administrator can commit any previously commanded
changes to EEPROM. This will store the new operating parameters and automatically do
a warm reboot of the CiM-25/600. The command protocol is as follows:
Format: !EE