Comtech EF Data CiM-25/600 User Manual
Page 55

CiM-25/600 IP Enabled M&C
Rev. 3
SNMP Interface
CD/CIM25600.IOM
35
3.5.1 T
ELNET
A
DMINISTRATIVE
F
UNCTIONS
3.5.1.1 C
HANGE
IP A
DDRESS
, G
ATEWAY AND
M
ASK
Using the !IP command, the Administrator can change the IP Address, IP Gateway, and
IP Mask. The command protocol is as follows:
Format:
!IP
Example:
!IP 10.6.30.2 10.6.30.255 255.255.0.0
Query Format:
!IP ?
Response:
!IP 10.6.30.2 10.6.30.255 255.255.0.0
Note:
Changes made via this command do not become active until the user has sent a !EE
command to commit the changes to EEPROM of the CiM-25.
This manual is related to the following products: