Comtech EF Data CiM-25/600 - Manual (Page 39)

CiM-25/600 IP Enabled M&C Rev. 3
SNMP Interface CD/CIM25600.IOM
19
3.3.6 M
ODEM
C
ONFIGURATION
P
AGE
(R
X
/T
X
)
This page can be viewed by all three levels of user login. However, only a user with
Administrative or Read/Write privileges can submit changes to this page. This page
allows the user to configure the primary Transmit and Receive Parameters of a CDM-600
Modem.
Note: The Tx and Rx interface Type and Frame Module have higher priority than other
parameters, and should be configured before setting other parameters.