Comtech EF Data CiM-25/600 - Manual (Page 64)

CiM-25/600 IP Enabled M&C Rev. 3
SNMP Interface CD/CIM25600.IOM
44
3.6.5 C
HANGING
S
ERIAL
N
UMBER
Perform the following:
1 Enter the following command:
Command: <0/SNM=xxxxxxxxx’cr’
Where x is the Serial Number as shown on the label of the CiM-25.
Response: >0/SNM=
Example: >0/SNM=022080125A’cr’
2 To query the Serial Number enter: >0/SNM?’cr’
IMPORTANT
The Serial Number is unique to this unit. Change only under factory direction or
if it does not match the label.