Comtech EF Data CiM-25/600 - Manual (Page 142)

CiM-25/600 IP Enabled M&C Rev. 3
SNMP Interface CD/CIM25600.IOM
122
c = Rx Traffic status
0 = Rx Traffic OK
1 = Demodulator unlocked
2 = AGC Alarm - signal out of range
3 = Demux
4 = Spare
5 = Buffer Slip
6 = AIS detected on incoming data
7 = Eb/No alarm
8 = Buffer Clock activity
d = Open Network
0 = No Faults
1 = Loss of Tx frame
2 = BER Alarm
3 = Loss of Tx multiframe
4 = Tx signaling AIS
5 = Tx Remote alarm
6 = IBS satellite alarm
7 = IDR Rx BWA1
8 = IDR Rx BWA2
9 = IDR Rx BWA3
A = IDR Rx BWA4
B = IDR Tx BWA1
C = IDR Tx BWA2
D = IDR Tx BWA3
E = IDR Tx BWA4
e = Outdoor Unit (ODU)
0 = No Faults
1 = ODU Faulted
2 = ODU Communication Faulted
Trap is generated when fault status is changed since last poll.
A.7.98
UNIT
C
ONFIG
C
HANGE
T
RAP
Name unitConfigChangeTrap
OID 1.3.6.1.4.1.6247.18.1.9.0.2
Full path iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247)
.cdm600(18).cdm600Objects(1).trapNotifications(9).trapNotificationsPr
efix(0). unitConfigChangeTrap(2)
Module CDM600
Parent trapNotifications Prefix
Prev sibling unitFaultTraps
Type NOTIFICATION – TYPE
Status current
Objects
1 unitFaults
Description Unit Configuration Change Trap using unitFaults
Trap is generated when a modem parameter command is submitted
since last poll.