Comtech EF Data CiM-25/600 - Manual (Page 124)

CiM-25/600 IP Enabled M&C Rev. 3
SNMP Interface CD/CIM25600.IOM
104
A.7.65
EDMAC
F
RAMING
M
ODE
Name edmacFramingMode
OID 1.3.6.1.4.1.6247.18.1.5.1
Full path iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247).cd
m600(18).cdm600Objects(1).utilityParameters(5).edmacFramingMode(1)
Module CDM600
Parent utilityParameters
Next sibling edmacAddress
Type OBJECT-TYPE
Numerical syntax SNMP_SYNTAX_INT
Base syntax INTEGER
Composed syntax INTEGER
Status current
Max-access read-write
Value list
1 idle(0)
2 master(1)
3 slave(2)
Description EDMAC Framing Mode. (EFM?, EFM=)
A.7.66
EDMAC
A
DDRESS
Name edmacAddress
OID 1.3.6.1.4.1.6247.18.1.5.2
Full path iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).comtech(6247)
.cdm600(18).cdm600Objects(1).utilityParameters(5).edmacAddress(2)
Module CDM600
Parent utilityParameters
Prev sibling edmacFramingMode
Next sibling unitTestMode
Type OBJECT-TYPE
Numerical syntax SNMP_SYNTAX_INT
Base syntax INTEGER
Composed syntax INTEGER
Status current
Max-access read-write
Size list
1 0..9999
Description Edmac Slave Address Range. (ESA?, ESA=)
This command is only valid for an EDMAC master. When used as a
Query, it may be sent to an EDMAC slave, which will respond with the
appropriate address.