Comtech EF Data CiM-25/600 - Manual (Page 44)

CiM-25/600 IP Enabled M&C Rev. 3
SNMP Interface CD/CIM25600.IOM
24
3.3.11 CSAT-5060
AND
KST-2000A/B ODU P
AGES
The CiM-25/600 IP Module can function with CSAT ODU firmware version 2.18 or
higher and KST-2000A/B ODU. All ODU pages are accessible only when ODU COMM
on the Utilities-Unit page is set to ENABLED.
Note: The same three menu options on the left side of the screen capture work for both
CSAT and KST ODU. The correct page will be brought out for the correct ODU when
the ODU menu is clicked.
3.3.11.1 CSAT-5060 ODU C
ONFIGURATION
P
AGE
This page can be viewed by all three levels of user login. However, only a user with
Administrative or Read/Write privileges can submit changes to this page. The user can
use this page to configure the primary Transmit and Receive Parameters of a CSAT-5060
ODU.
Note: If redundant ODUs are used, the page can be toggled between the Online and
Offline units by selecting ODU #1 or ODU #2 in the ODU Selection box and clicking
Submit.