Comtech EF Data CiM-25/600 - Manual (Page 59)

CiM-25/600 IP Enabled M&C Rev. 3
SNMP Interface CD/CIM25600.IOM
39
3.5.1.11 C
HANGE
P
RIMARY
/S
ECONDARY
DNS IP A
DDRESSES
Using the !DN command, the Administrator can set the primary and secondary DNS IP
Addresses. The command protocol is as follows:
Format: !DN
Response: Command Successful
Query Format: !DN ?
Response: !DN
Note: Changes made via this command do not become active until the user has sent a !EE
command to commit the changes to EEPROM of the CiM-25.
3.5.1.12 C
HANGE
SMTP D
OMAIN
N
AME
Using the !SN command, the Administrator can set the SMTP domain name. The
command protocol is as follows:
Format: !SN
Response: Command Successful
Where: can be any alphanumeric string with a length of 1 to 100
characters.
Note: disabled in the field disables SMTP.
Query Format: !SN ?
Response: !SN
Note: Changes made via this command do not become active until the user has sent a !EE
command to commit the changes to EEPROM of the CiM-25.
3.5.1.13 C
HANGE
SMTP D
OMAIN
IP A
DDRESS
Using the !SD command, the Administrator can set the SMTP Domain IP Address. The
command protocol is as follows:
Format: !SD
Response: Command Successful
Note: An IP Address of 0.0.0.0 disables SMTP.
Query Format: !SD ?
Response: !SD
Note: Changes made via this command do not become active until the user has sent a !EE
command to commit the changes to EEPROM of the CiM-25.