Comtech EF Data CRS-280L - Manual (Page 61)

CRS-280L L-Band IF Switch for 1:N Redundancy Revision 1
Appendix B MN/CRS280L.IOM
B–5
2
Carefully reconnect the Power Supply Cable to its
mating connector on the new power supply module
PCB.
3
Assemble the power supply module plate to the
CRS-280L chassis, taking care not to crimp the
Power Supply Cable when doing so, then tighten the
four captive mounting screws of the module to
secure the module in place.
Power Supply
Cable