ChamSys MagicQ User Manual User Manual

Page 375

MagicQ User Manual

346 / 355

This is a Window select button. Pressing this button makes the Intensity Window the active window. If the window was not open,
then the window is opened.

The

Intensity Window

is used to set the level of dimmer channels and the intensity attributes of intelligent heads. The Window

supports two views,

Programmer and Preset

Pressing and holding the Intensity button causes the Intensity Window to be temporarily made the active window until the button
is released.

This is a Window select button. Pressing this button makes the FX window the active window. If the window was not open, then
the window is opened.

The

FX window

enables users to store their favourite FX into a window for quick recall.

FX can also be applied directly from the Group window using the Add FX button.

are applied to the currently selected heads.

If no heads are currently selected then the Group Window is opened to enable selection of heads.

Pressing and holding the FX button causes the FX Window to be temporarily made the active window until the button is released.

Pos

This is a Window select button. Pressing this button makes the Pos Window the active window. If the window was not open, then
the window is opened.

The Pos Window is used to set and

modify

the position attributes of intelligent heads. The Pos Window also displays and allows

selection of Palette entries from the

Position Palette

It also supports the

Flip

function for moving heads.

Pressing and holding the Pos button causes the Pos Window to be temporarily made the active window until the button is released.

Colour

This is a Window select button. Pressing this button makes the Colour Window the active window. If the window was not open,
then the window is opened.

The Colour Window is used to set and

modify

the colour attributes of intelligent heads. The Colour Window also displays and

allows selection of Palette entries from the

Colour Palette

Pressing and holding the Colour button causes the Colour Window to be temporarily made the active window until the button is
released.

Pressing the colour button repeatedly cycles through the different colour views.

Beam

This is a Window select button. Pressing this button makes the Beam Window the active window. If the window was not open,
then the window is opened.

The Beam Window is used to set and

modify

the beam attributes of intelligent heads. The Beam Window also displays and