Wireless key, Port settings, Magicq wings and interfaces – ChamSys MagicQ User Manual User Manual
Page 337: Magicdmx mode, Serial com port, Serial baud rate, Serial parity, Serial data bits, Serial stop bits, 17wireless key

MagicQ User Manual
308 / 355
42.14.17
Wireless key
Wireless encryption type when using a USB to Wireless interface with the MagicQ Pro 2010 or Pro 2014 console. Used when
Wireless encryption is set to WEP or WPA. Also for MQ70.
For WPA the key must be 8 or more characters.
When Wireless Encryption is set to MQ then the Wireless key is used to specify to a password that must be entered on the iPhone
Application.
42.15
Port Settings
42.15.1
MagicQ Wings and Interfaces
This setting enables MagicQ Wings and ChamSys USB interfaces to be connected. The options are No, Yes, and Yes – auto
DMX.
This option affects MagicQ Wings (Mini, PC, Maxi, Extra, Playback, Execute) and USB Interfaces (Twin DMX, Audio, SMPTE).
On MagicQ consoles, when set to Yes – auto DMX then MagicQ automatically outputs on the rear DMX ports starting from
Universe 1 – provided that none of the Universes have been explicitly set to “MQ Direct”.
On MagicQ PC/Mac when set to Yes – auto DMX then MagicQ automatically outputs DMX from a connected MagicQ Wing
starting from Universe 1 – provided that none of the Universes have been explicitly set to “MQ Wing”.
This option also enables MagicQ to search for SnakeSys products on the network to unlock demo mode on PCs and Macs.
42.15.2
MagicDMX mode
The options are None, DMX Out or DMX In. This option defaults to DMX Out.
Setting the Out Type of Universe 1 in Setup, DMX I/O to MagicDMX will automatically set this option to DMX Out.
Note that DMX In is not available on the MagicDMX Basic version.
42.15.3
Serial COM port
MagicQ supports one serial port for remote connections. On MagicQ consoles select COM1. On MagicQ PC select a COM port
from COM1 to COM8 depending on which COM port you wish to use.
42.15.4
Serial baud rate
MagicQ consoles support baud rates from 300 to 57600. Baud rates supported on MagicQ PC will depend on the PC.
42.15.5
Serial parity
MagicQ PC supports None, Odd, Even, Mark and Space. MagicQ consoles only support None, Odd, Even.
42.15.6
Serial data bits
Data bit sizes of 4,5,6,7 and 8 are supported.
42.15.7
Serial stop bits
MagicQ PC Supports 1,1.5 or 2 stop bits. MagicQ consoles support 1 or 2 stop bits.