ChamSys MagicQ User Manual - Manual (Page 363)

MagicQ User Manual 334 / 355
Table 46.3: (continued)
Reselect last heads after CLEAR ALL
Select Group 1 1 * *
Select Groups 1 to 4 1 THRU 4 * *
Sub select 1st head 1 NEXT HEAD
Sub select 1st and 2nd head in selection 1 + 2 NEXT HEAD
Sub select 3rd, 4th and 5th head 3 THRU 5 NEXT HEAD
Sub select element 2 . 2 NEXT HEAD
Sub select pair SHIFT + SINGLE
Select all heads using palette ALL +
Select heads active in Playback ALL +
Select heads above 20% intensity 20 ALL + INT
Select all heads active in prog CTRL + ALL
Reselect last heads after CLEAR ALL
Change selection order Press and hold ALL
Table 46.4: Lamp On / Lamp Off / Reset
Lamp On entire rig MACRO
Lamp Off entire rig MACRO
Lamp On selected heads SHIFT + LOCATE
Lamp Off selected heads CTRL + SHIFT + LOCATE
Reset selected heads CTRL + LOCATE
Lamp on selected heads * + +Lamp off selected heads *
Lamp off selected heads
Reset selected heads * / /Table 46.5: Setting IntensitiesSet head 1 to 100%1 @ FULL (Also 1 FULL)Set head 1 to 50%1 @ 50 ENTERSet heads 1 to 4 to 100%1 THRU 4 @ FULLSet head 1 +10%1 @ + 10 ENTERSet head 1 –1%1 @ - 01 ENTERSet head 1 at 50, all others at 0%1 @ 50 - -Set head 1 to 50% time 3 secs1 @ 50 / 3 ENTERSet 2nd element from head 1 to 50%1 . 2 @ 50Set 2nd element from head 1 to 10 to 50%1 THRU 10 . 2 @ 50Set element 2 and 3 from head 1 to 50%1 . 2 THRU 3 @ 50Heads 1 to 10, 100% split delays 4s to 1s, 1s fade1 THRU 10 @ FULL / 4 THRU 0 / 1PC Keyboard THRU = ‘>’ FULL = ‘#’Table 46.6: FXAdd FXSelect heads, FX Convert chase to FXCUE STACK Force Cue to have no FXSelect heads Pages: 1 … 361 362 363 364 365 … 384 wrong Brand wrong Model non readable This manual is related to the following products: MagicVis MagicQ Focus Remote MagicQ Console See also other documents in the category ChamSys Software: SnakeSys (50 pages) MagicHD (66 pages) MagicQ Software Change Log (135 pages) Sitemap
Table 46.5: Setting Intensities
Set head 1 to 100% 1 @ FULL (Also 1 FULL)
Set head 1 to 50% 1 @ 50 ENTER
Set heads 1 to 4 to 100% 1 THRU 4 @ FULL
Set head 1 +10% 1 @ + 10 ENTER
Set head 1 –1% 1 @ - 01 ENTER
Set head 1 at 50, all others at 0% 1 @ 50 - -
Set head 1 to 50% time 3 secs 1 @ 50 / 3 ENTER
Set 2nd element from head 1 to 50% 1 . 2 @ 50
Set 2nd element from head 1 to 10 to 50% 1 THRU 10 . 2 @ 50
Set element 2 and 3 from head 1 to 50% 1 . 2 THRU 3 @ 50
Heads 1 to 10, 100% split delays 4s to 1s, 1s fade 1 THRU 10 @ FULL / 4 THRU 0 / 1
PC Keyboard THRU = ‘>’ FULL = ‘#’
Table 46.6: FX
Add FX Select heads, FX
Convert chase to FX CUE STACK
Force Cue to have no FX Select heads