ChamSys MagicQ User Manual - Manual (Page 320)

MagicQ User Manual 291 / 355
• Exit board test mode (ALT + CNTRL + SHIFT).
• Go to Setup, View Settings and select Calibrate Touch. Press 1 to confirm.
• Now press the X on the external touch screen in the four different positions as requested. Do not press on any other monitors
except the one being calibrated.
If the Touch Screen shows a status but does not give consistent values in Board Test then try a different Touch Type.
If the Touch Screen shows consistent values in Board Test but does not respond correctly then recalibrate the touch screen.
42.7 Mode & Security Settings
The Settings View of the Setup Window uses tabs to group similar settings together.
42.7.1 Country
The country setting determines the Country. Currently the country setting has the options UK, US, F (French), D (German), E
(Spanish), P (Portugese), I (Italian), NL (Dutch). The country setting changes the menu items into the appropriate language.
MagicQ restricts some options including multi console programming on the US version.
42.7.2 Time Zone
This is used for astronomical scheduled events. Enter the time zone from -23 to +23.
42.7.3 Latitude
This is used for astronomical scheduled events. Enter the latitude in degrees.
42.7.4 Longitude
This is used for astronomical scheduled events. Enter the longitude in degrees.