Control net subnet mask, Wireless mode, Wireless ip address – ChamSys MagicQ User Manual User Manual
Page 336: Wireless subnet mask, Wireless channel, Wireless ssid, Wireless encryption, 10control net subnet mask, 11wireless mode, 12wireless ip address
MagicQ User Manual
307 / 355
42.14.10
Control net subnet mask
For future use.
42.14.11
Wireless Mode
Choice of wireless mode when using a USB to Wireless interface with the MagicQ Pro 2010 or Pro 2014 console. Also when
using the internal wireless support on a MQ70. The options are
• Disabled
• Managed (2010/2014)
• Ad-Hoc (2010/2014)
• Access Point (MQ70)
When using an external wireless access point via fixed network this option should be set to Disabled.
42.14.12
Wireless IP address
IP address when using a USB to Wireless interface with the MagicQ Pro 2010 or Pro 2014 console. Also for MQ70.
For ad-hoc connection to an iPhone or iPod Touch use 192.168.1.20.
42.14.13
Wireless subnet mask
Sub net address when using a USB to Wireless interface with the MagicQ Pro 2010 or Pro 2014 console. Also for MQ70.
For ad-hoc connection to an iPhone or iPod Touch use 255.255.255.0.
42.14.14
Wireless channel
Wireless channel to use when using a USB to Wireless interface with the MagicQ Pro 2010 or Pro 2014 console. Also for MQ70.
For connection to an iPhone or iPod Touch try channel 5.
42.14.15
Wireless SSID
Wireless SSID (identifier of the Wireless network) to use when using a USB to Wireless interface with the MagicQ Pro 2010 or
Pro 2014 console. Also for MQ70.
For connection to an iPhone or iPod Touch enter a name for your network – e.g. mynetwork.
42.14.16
Wireless encryption
Wireless encryption type when using a USB to Wireless interface with the MagicQ Pro 2010 or Pro 2014 console. Also for
MQ70.
The options are None, WEP, WPA or MQ.
WEP and WPA are secure wireless encryption methods. Set the key in the Wireless Key field.
When set to MQ the wireless is kept open but the application requires users to enter a password to connect to the console. The
password should be set in the Wireless Key field. When this option is selected the iPhone remote will be passworded regardless
of whether the connection is made through a USB to Wireless interface or an access point external to the MagicQ system.