Datalogic Scanning FALCON 4400 SERIES - Manual (Page 99)

Bar Code Parameters
Product Reference Guide E-3
Bar Code Parameters
The following table lists the standard customer programmable settings for the
Falcon.
Table E-2. Programmable Standard Bar Code Settings
Code Parameter/ Description
I.
D.
#
Accep-
table
Input
Defaults Scanner Type
Min Max
Fac-
tory
Laser/
Linear
Imager
2D
Imag
er
Codabar
Enter 1 for On
and 0 for Off.
Enable
Enables/disables the Codabar sym-
bology.
0
3
0
0
On or
Off
Off On On
9 9
Enable
Aggres-
sive
Decoding
Enables more aggressive decoding
algorithms to be used in order to
scan hard to read labels.
0
3
0
1
On or
Off
Off On Off
9
Enable
Checksum Requires the use of checksum
characters to verify a bar code.
0
3
0
2
On or
Off
Off Off Off
9 9
Send
Checksum Instructs the terminal to include the
checksum in the label transmission
0
3
0
3
On or
Off
Off Off Off
9 9
Concate-
nate
Allows the decoder to retain and
join together a series of specially
formatted labels, and then send a
single transmission of the entire
result.
0
3
0
4
On or
Off
Off Off Off
9