Datalogic Scanning FALCON 4400 SERIES - Manual (Page 22)

Configuration Settings
2-8 Falcon ® 4400 Series with Windows Mobile ®
• Trigger Options: Select to enable or disable Pistol Trigger or Scan Key for
Bar Code, Image, or RFID (if installed). Select the desired radio buttons
to define the button functions. Available items will vary according to the
model.
Figure 2-7. Decoding Properties: Imager Options
• Imager Options : (Models with Imaging module only). Enable/Disable
Illumination and the Aiming Beam for Imaging Mode lets you select
between Concurrent (the aiming beam and the illumination beam
turn on at once); and Interlaced (the aimer beam and illumination
alternate being on). Set Imager
Brightness and Timeout properties
using the sliders.
Select Configure > General from the menu to view other configuration options.