Datalogic Scanning FALCON 4400 SERIES - Manual (Page 18)

Configuration Settings
2-4 Falcon ® 4400 Series with Windows Mobile ®
Backlight
Change the Backlight settings by completing the following steps:
1. Tap > Settings > System and tap the Backlight icon.
Some Falcon keypads also provide keyboard shortcuts to launch the
Backlight control panel:
• On the 26-key model press: + ( ).
• On the 48-key model press: + ( ).
• On the 52-key model press: +< . > .
2. You can specify different settings for use when the device is running
on Battery Power or External Power.
• Specify the amount of time the backlight stays on when device is
not in use.
• Set the backlight to turn on automatically when any key is pressed
or the touchscreen is tapped, either while on battery or external
power.
3. Additionally, the PSC tab provides several other options:
• Adjust the Brightness slider by tapping it with the stylus. You can
also use the navigation keys on the Falcon keypad to move the
slider.
• Turn on the backlight when the trigger is pulled.
• Launch the Backlight control panel from the keyboard. See above
for key sequences.
Increasing backlight brightness can cause the battery pack to discharge at a faster
rate. The battery discharge rate decreases with a decrease in backlight usage.